Skip to main content

Posts

Showing posts from May, 2016

Altec 605B experiments

Hot on the trail from the 1" compression driver survey, I set forth to re-evaluate my open baffle mounted Altec 605B. This Duplex system is essentially an Altec 416A woofer + Altec 806A compression driver with an integral short horn. I wanted to address a mild honk and try to squeeze out more "air" in the top end from the horn/driver combo.
605B as a 416A woofer
Since my modus operandi has always been to listen carefully to each component as a separate entity, I disconnected the compression driver from the N1600C crossover and listened to the woofer rolling off at about 1100 hz as well as bypassing the crossover, in full range mode. 

After several days of listening with and without the crossover, I realized that the "honk" actually emanated from the woofer. Perhaps this was due to the typical midrange impedance rise in a woofer exacerbated in an open baffle by the lack of a true enclosure? So I winged and auditioned a few Zobel EQ values and ended up with 10 …