Showing posts with label Homebrewer. Show all posts
Showing posts with label Homebrewer. Show all posts

Tuesday, December 1, 2020

Home Brewer: Silbatone 755 Cabinet DIYers Club

Left = JE Labs clone (by John Piro)
Right = J-Rob's Silbatone original 

"The cabinets were designed by genius Silbatone engineer Dr. Stefano Bae as a group project for the Silbatone-sponsored DIY/Western Electric forum in South Korea. 100 pairs were quickly sold out, immediately driving up the world price for 755As. The original uses Silbatone's custom silver litz wire, which is said to be an essential ingredient of the original recipe, and top shelf WBT connectors.

Over the years Silbatone designed and made literally dozens of experimental boxes, including back horns for up to four (755A) drivers per side. This was probably the most successful, although rather modest.

My analysis of this untuned little cabinet is that it falls under the 'small box with a hole in it' design paradigm."

May 17, 2019



After I uploaded the Silbatone cabinet DIY info, I've received numerous inquiries about what drivers to use on this cabinet. Since it's impossible for me to try all the 8" drivers ever made, I thought it was best to let my readers chime in with their creations.

Altec 755As in Manila



Tango MCT999 MC transformer,
JE Labs 5691 passive EQ RIAA phono + 76 > Tango NP216N line stage, 
JE Labs SE2A3 with Magnequest TFA204 OPTs (on the floor)

Nonong is the only high school classmate and friend I remained in contact with after leaving Manila many moons ago. He coined SETUP (Single Ended Triode Users of the Philippines) back in the '90s and was one of the three pioneers listening to idler driven turntables, high mass tonearms, SPU cartridges + transformers, DIY preamps and SET amps driving high efficiency speakers.

Garrard 301 + Ikeda IT407 + SPU Meister Silver
JE Labs SE300B deluxe mono blocks with Tamura F7002s 
on copper chassis

His cherished pair of Altec 755As have been mounted on open baffles since the mid '90s. But as soon as he saw the Silbatone cabinet plan, he had the cabinets built in no time.

Altec 755As in the USA


Nate Grindheim aka Redboy in Audiokarma and HiFi Haven is an avid DIYer. You'll find his meticulously crafted MC step up transformers and amps in those aforementioned audio forums as well as in his Flickr stream.

Nate says:

"My buddy Gary (aka ejfud) built the cabinets for me. He knew I had the drivers and got tired of waiting around for me to build something for them, so he took the initiative to knock a pair together for me. He's a good friend to have around.

These things are really wonderful. They have that amazing Tone (with a capital "T"!) that I'm after, and the sound... it's just right, and good. They make music.

I am excited to get some proper amplification for them. There's a pair of 6L6 IPC amps here with Peerless iron that I think will be a great match, but I still need to overhaul them."


Altec 755C in Manila



Ben C recently retired from banking so he can focus his energy on his DIY audio passion. He's been stuck in Toronto since the Covid 19 lockdown and is itching to return home to finish his other audio projects.

Garrard 401 + RMG309 + FR64S + SPU Aniversary,
DIY preamp and SET amps

 I'm hoping that he'll drop by before he heads back to Manila when this is all over.

Altec 755E + JBL 075 in Manila



This bespoke cabinet is Joey's interpretation of the Silbatone executed in the Harana Audio Workshop


Harana Audio is also the official representative of Shinichi Suzuki and his Western Electric inspired G.I.P. Laboratory field coil drivers in the Philippines.

Lafayette SK98/Pioneer PIM8L in the USA



I've featured this driver and cabinet in a full-length profile of John Piro's creations. But it's worth reiterating a non Altec 755 driver successfully used in the Silbatone cabinet.


If you want your DIY Silbatone cabinet project added to this exclusive club 😉, please leave a comment with your email address. I will reply to you directly.



Sunday, February 2, 2020

John Piro, Craftsman Extraordinaire!

When John emailed me a picture of his WE753C clone cabinets, I had to have a pair!

JP in the man cave with my freshly minted Altec 753C boxes

JP's System (in constant flux)
Thorens TD124, Marantz 7T, Garrard 301
DIY Stuff
Marantz 8B, REL Precendent
DIY amps
Wharfedale SFB3

Garrard 301 + Karmadon Viscous Damped Tonearm

WIP - Gray Research HF-500 Turntable
Hey JP, are you prepping this for a Schröder BA tonearm? 😎

JP repurposed a WE chassis for his preamp

JP's preamp is based on JE Labs Circuit

JP's Simple 45 amp using James 6113HS OPTs

JP's Stereo SE300B with James 6123HS OPTs visited the man cave,
it's based on the JE Labs circuit


JP's Vintage RCA Collection

RCA Theatre Amps

RCA Theatre Amps

RCA Compression Drivers

RCA Horns

Altec 614 cabinet
by JP

Open Baffle by JP

Open Baffle by JP


JP's handcrafted multi-cell horn made from wood, 
based on the Western Electric WE26A 


REL Precedent 646B with a DIY front faceplate by JP

JP's take on the Dr. Bae/Silbatone 755A cabinet


Unlike my friends in Manila who have reported good things using the Altec 755C in this box, JP prefers the Lafayette SK98/Pioneer PIM8L


If you want to contact John for a commission, please leave a comment with your email address. Your comment will not be published, instead, I will reply with his contact info.

Coming Soon
JP757A











Thursday, January 9, 2020

TBT '96-'97: JE Labs Project Pics



I'll start the new decade with scanned negatives of my DIY Audio projects from the mid to late 90s. Most of these pictures were taken either with my Pentax K1000 or Leica M3 + Rigid 50mm Summicron, loaded with either Agfa Vista or Kodak Plus X, processed by a local lab. I didn't know how to develop film yet back then. 😉 

ca. '96

My last Dyna PAS hack



This Dyna PAS 2 chassis sports an RCA phono circuit with Ni-Cad batteries for cathode bias. Check out those wonderful (then) anti-high-end paper in oil caps from Jensen, Facon and Icar. Too bad they get leaky after a couple of years.


Yup, that's an octal socket in the line stage for the mighty 6SN7!


Under the hood of the outboard power supply is a choke for the B+ for better filtration. Connection to the main preamp is via an octal plug/socket.


By this time I was already a firm believer in tube rectification. I retained the original PAS transformer for B+ supply duty only and relegated DC filament duty to another power transformer.


JE Labs Stereo "Classic" SE300B with Audio Note UK 2.5K OPTs



A Thorens TD124 + a (then) newly-acquired ($60!) Grace G540L tonearm + Grado 8MZ on my very first laminated plywood plinth project. All these components are still in service.


The original Simple 45


ca. '97


JE Labs Stereo SE2A3 with Tango U808 OPTs


JE Labs Classic SE300B mono-block with Audio Note UK 3K OPT


I briefly owned a pair of AES/Soliloquy 5.2 TQWT speakers. Coming from Spendor LS3/5As, these sounded lean and weren't more efficient either - probably in the high 80s rather than the claimed low 90s.😏


Fortunately, I snagged a pair of Altec 755Cs at a hamfest and quickly whipped out a pair of small open baffles. I was hooked!


The Altec 755Cs in open baffles based on dimensions published by Stereo Sound "Tube Kingdom" Issue No. 3/1996. And yes, I added a Garrard 301 to my system!


I got my Garrard 301 in the early summer of '97 along with the Altec 755Cs. 


This was the block diagram of my system before the end of the millennium as a featured "Home-brewer" in Sound Practices.  I can't believe 20 years went by so quickly!